Some Shuttle XPCs have a handy connector at the back panel to connect an external power button. In case the XPC is installed in a scenario where it cannot be accessed directly, be it VESA-mounted or otherwise remotely installed, it can still be powered on or off conveniently by using an external push button switch. Shuttle therefore provides a 2-metre cable with fitting connections that only requires a push button switch. Cable Shielded, industry-standard cable Length_ ca. 2 metres Outer diameter_ 6.5 mm Two-pole cable_ 2x 0.34 mm² Colour_ Black Connector Dual header connector, 2.54 mm pitch Two female crimp contact pins, tin-plated Required push button switch The cable provides tin-plated leads for a push button switch of your choice. The connection to the external power button can be screw-type or soldering. Compatibility The cable can be used with the following Shuttle XPC models_ XH310(V), XH310R(V), XH610(V), XH410G, XH510G(2), DS61, DS81(L), DH110(SE), DH170, DQ170, DH270, DH310(V2), DH310S, DH370, DH410(S), DH470, DH610(S), DH670, DS47, DS407(T), DS437(T), DS57Ux, DS67Ux, DS68U, DS77Ux, DS10Ux, DS20Ux, DX30, DL10J, DL20N(6), SH510R4, SH570R6 (Plus), SH570R8, SW580R8